By writing of this post, I just download the AX7 CTP8 Vm and configure on my machine.
I successfully configure it on hyper V. Only one tricky point is external network adapter in Hyper V.
First step is download VHD and extract it to some place. If you are registered to AX 7 Feedback program, then you must have vhd download link.
After the download, run the self-extract exe and extract the Vhd at specific location.
Step 2. Create a new external network adapter
Open hyper v console, and create new external network. As I am using wireless network, so I select it as bridge for using internet inside VM. You can use your Ethernet network as bridge.
Step 3 Create a new Vm.
Select generation 1 vm in next step
Set 8 GB ram to vm, recommend ram is 16 GB.
Select network adapter we created in previous step.
Select use existing hard drive and select the Vhd extracted in previous steps.
Click on next and click on finished.
Run the VM and click on connect button. Login in with “Administrator” and Password is “pass@word1”
When VM is running you find new network connection ask your permission, Click on Yes button.
Wait a few minutes and then open Internet Explorer and type following url
https://usnconeboxax1aos.cloud.onebox.dynamics.com
This will lead you at login page
You have to use following user name and password to login
- User name: administrator@contosoax7.onmicrosoft.com
- Password: Pass1Word
If your network Adapter is successfully configured, AX 7 welcome page will open, other wise you will find error page.